Gemtech GT7000 - Auto-run Program; Using the Energy-Star Program; Energy-Star Program Details

2 Auto-run
This Thermostat comes preprogrammed with an Energy-Star
TM
approved program. This program is recommended by the EPA for
energy efficiency.
We strongly recommend that you Auto-Run this
program for one week, and see if it works for you. If it
does not fit your needs you can always input a
custom program.
.
To Auto-Run the Energy-Star
TM
program, select HEAT or COOL with the mode
switch. The unit is now running the Energy-Star
TM
program.
.
The clock and the ambient temperature are displayed on the right.
They alternate every 2 seconds. One of the TIME SLOT icons MORN DAY EVE NITE
comes on, this indicates the TIME SLOT active in the Energy-Star
Tm
program.
.
The programmed temperature is shown on the left. For program details refer to
the Energy-Star
TM
program chart below.
PG 3
All Days  70
o
F  62
o
F  70
o
F  62
o
F
P1
6:00am
HEAT
P2
8:00am
P3
6:00pm
P4
10:00pm
All Days  78
o
F  85
o
F  78
o
F 82
o
F
P1
6:00am
COOL
P2
8:00am
P3
6:00pm
P4
10:00pm
TARGET TEMP
ROOM TEMP
MO
AM
HEAT2