Manual Part NO.: 119509-00 Rev. A
1.0 Safety Information
Note the following safety instructions when assembling, installing, and operating the Genasys
360.
• Read and adhere to the instructions detailed in this manual. Keep this manual with the 360
at all times.
• Make sure all steps are properly taken during assembly and installation. Failure to follow
these steps may result in damage to the device and/or void the warranty.
• Personnel operating the device should always use hearing protection and limit exposure to
high volume audio output.
• Do not bend, twist, or pinch cables, especially at connection points.
• Make sure all cable connection ports are kept clean and clear of debris.
• Only use attachments/accessories specified by Genasys.
• Refer all servicing and maintenance to qualified personnel.
To Next Page
Loading...
