Pre-Installation Information and Recommendations
032-0265-EN Rev 1 3-3
Physical Description
The DenOptix QST system has several configurations. Even if the basic hardware is the same,
DenOptix QST is provided with different licenses for scanning different types of plates,
according to the chosen model. See the following table for a complete list of components for
each model. At the interception of “models” (columns) and “components” (rows) you’ll see the
quantity supplied for that item.
The Intraoral (FMX) and Extraoral (EO) models are upgradeable to the Combo (COMBO) system.
Contact your local Gendex representative for details. In addition, the Extraoral and Combo
systems can be upgraded to Cephalometric by ordering from the following table.
NOTE: Buying some components such as imaging plates or carousels may not allow
youto use them without License from Gendex. Upgrade Kits are available for the
following: FMX series to upgrade to a Combo system, EO series to Combo system,
and EO or Combo series to Ceph.
Customer Supplied Components
• Bottle of anhydrous isopropyl alcohol for cleaning imaging plates
• Computer system as described on page 3-10, “Computer requirements”
• Monitor for viewing