032-0265-EN Rev 1 6-1
Chapter
6
Storage and Shipment
Storage
The DenOptix QST System has been designed for long-term operation in a normal office
environment.
The system must be protected from adverse conditions such as excessive moisture, cold or
heat. If the system is to be stored for a long period of time, pack the unit in its original carton.
While in storage, keep at moderate temperatures and protect against moisture and humidity.
When you are ready to use the system again, unpack it and allow the scanner to come back to
room temperature. Then, follow the guidelines outlined in Chapter 4.
Shipment
The DenOptix QST System is designed to be shipped in its original shipping container by normal
commercial carriers. Ensure that the carousel has been removed from the scanner and that the
carousel well is empty.
If the system is to be moved long distances or under adverse conditions, it should be protected.
This can be accomplished by wrapping the DenOptix QST scanner in a plastic bag before putting
it in the original packing materials.
If you are shipping the scanner, it is necessary to park the optics module in the center of travel
prior to shipment. Contact your local Gendex rep for details.
To Next Page
Loading...
Need help?
General
