System Operating Instructions
032-0265-EN Rev 1 4-9
17. The procedure for scanning
a panoramic/ cephalo-
metric plate is the same as
for the intraorals.
It is
possible to select how
many plates
to scan, and
what size. As with
intraorals, you can choose
between 150, 300, and 600
DPI. Scan time will be longer
as you choose higher DPI. To
switch between panoramic
and cephalometric, click on
the “P” or “C” symbol in the
lower right hand corner. To
change between inch and
metric, click “IN” or “CM”.
Choose your imaging plates
b
y cl
icking on each of the
imaging plate boxes you
want to acquire and then
clicking on “scan”.
The plates in black will be
skipped (not acquired). To
save the template, cli
ck on
th
e template menu choice
and save. When the scan is
complete, the I/O images
will appear on the screen.
NOTE: If a
n error occurs during the scan, the scanner will stop. Follow the
troubleshoo
ting guidelines to start scanning again. If the resulting image is not
diagnostic, erase the imaging plate and start again.
To Next Page
Loading...
