EasyManua.ls Logo

Gene Cafe CBR-101 - Chamber Installation and Safety Checks

Gene Cafe CBR-101
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1313
8. Operation
4. Close the lid. With the top of chamber facing to
your left, as shown in the gure, align the
chamber cover with the groove on the roaster,
and gently push the chamber down until it clicks
into place. To ensure that the chamber is
installed properly, lightly pull up on the chamber
handle. The chamber should not move upward.
* When install the roasting chamber and
body, make sure that the chamber cover
faces to the left.
* Failure to ensure that the roasting chamber
cover is completely closed, and that the
chamber is properly seated in the machine, may
result in damage or the machine not working
correctly.
5. To ensure safe operation, close the safety
cover and attach the cha collector to the left
side of the roaster before starting the machine.
* Remember that the Gene Café should
never be operated with the safety cover
open. It is dangerous to touch the hot
roasting chamber, especially when it is in
motion. Never insert foreign objects into
the roaster.
* Do not operate the Gene Café without the
roasting chamber in place.
* The Gene Café body and surrounding area
becomes very hot when the roaster is in
operation. Do not leave the unit running
unattended, especially if children and pets are
present.
* Before operating the roaster if children and
pets, be sure that the cha collector is clean and
properly tted onto the machine. Do not attempt
to attach anything other than the cha collector
to the cha collector port.
* To ensure safe operation, be sure that you have read this manual and thoroughly understand it.
Always remember to observe the following:
(1)
Keep the cha collector clean, including tthe mesh screen(metal punched holes).
(2) Remove any foreign objects from the roasting chamber groove and drum area.
(3) Remove any objects that may interfere with the cha collector port or obstruct the
roasting chambers rotation.
(4) Operate the machine in a well-ventilated area, ideally under an exhaust hood.
(5) Keep ammable materials well away from the roaster. Restrict access by pets and
children.
(6) As with all heat generating kitchen roaster, always keep a re extinguisher nearby.