2020
12.
Error Messages and Emergent Measures
٢In the event that the Gene Café is turned o by mistake.
Immediately turn the unit back on and resume roasting or manually activate the cooling cycle and
remove the roasting chamber when it stops in the proper position. If the chamber does not orient
to the proper position, do not attempt to forcibly remove it.
٢In the event that a power failure interrupts the roasting process.
If an unexpected power interruption shuts the unit down during roasting, the very hot beans may
cause a re and/or burn injuries. Move the roaster to a safe place and allow it to cool down. Use
extreme caution when moving the hot roaster, and wear protective oven mitts.
٢In case of a re
The extremely high temperatures inside the roasting chamber may cause the chas(silver skins)
to ignite. Remain calm and take the following steps:
* Fire in roasting chamber
1. Press the TEMP (START/STOP) dial to stop the rotation.
2. Protect your hands with oven mitts, carefully remove the chamber and pour burning contents
into the sink.
* Fire in the cha collector
1. Smoldering skins or cha in the cha collector will burn out on their own. Allow cha collector
to cool completely before attempting to remove it from the roaster for cleaning.
Error Messages & Description
Emergent Measures
Error
Message
Remarks
Temperature
sensor 1 error
Precaution for
the res
Irregular rotation.
Reed sensor error.
Heater disconnection.
Fan or temperature sensor 2 error.
* Contact to the Distributor at the backover if the above message at the view panel.
To Next Page
Loading...