EasyManua.ls Logo

Gene Cafe CBR-101 - Electrical Safety and Cord Handling; Obstruction and Foreign Object Safety

Gene Cafe CBR-101
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
6. Safety Precautions
* Do not place Gene Café on a pad,
cushion or electric blanket as a re
may result.
* Do not insert foreign objects,
especially metal, into the Gene Café
as this may create a shock hazard.
* Be sure that the Gene Café’s air intake
holes and the cha collector exhaust vent
are not obstructed. If blocked, overheating
and a re could occur.
* If a foreign object accidentally enters the
Gene Café, immediately unplug the roaster.
Contact Customer Service if the foreign
object is lodged inside the unit; do not
attempt to disassemble the Gene Café.
* Unplug the power cord in case of emergency.
* The Gene Café should only be
connected to a grounded, properly
rated electrical outlet. Overloading a
circuit may cause a re.
* If an extension cord must be used, be sure
that it is a heavy-duty type with a rating at
least equal to the power rating of the Gene
Café.
* If the power cord of your Gene Café
becomes damaged, do not operate the
roaster. Contact Customer Service or bring
the unit to a professional roaster repair
service to have the cord replaced.
* To prevent short circuit, do not bend
or force the power plug and do not
knot the cord or disconnect the
roaster from the wall outlet by pulling
on the cord.
* Dry hands thoroughly before handling the
power cord or operating the Gene Café.
* When not in use, disconnect the Gene Café
from the power source.
* Whenever the roasting chamber is
not mounted in the Gene Café, place
it in the chamber stand to reduce risk
of tipping and breaking.
* The roasting chamber is not designed to
stand upright without the aid of the chamber
stand.