EasyManuals Logo

Generac Power Systems PowerPact 7.5 kW Installation Guidelines

Generac Power Systems PowerPact 7.5 kW
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Fuel Conversion/Gas Connections
18 Installation Guidelines for 60 Hz PowerPact™
Fuel Consumption
Generator Natural Gas LP Vapor
1/2 Load Full Load 1/2 Load Full Load
6 / 7.5 kW 73 / 2.07 117 / 3.31 0.87 / 3.29 / 31.6 1.42 / 5.37 / 51.6
* Natural gas is in ft
3
/h / cm
3
/h
** LP is in gal/h / l/h / ft
3
/h
*** Values given are approximate. Use the appropriate spec sheet or Owners Manual for specific values.
Verify gas meter is capable of providing enough fuel flow to include household appliances and all other loads.
NOTE: The gas supply and pipe MUST be sized at 100% load BTU / Megajoule rating.
Always refer to the Owner’s Manual for the proper BTU, Megajoule and required gas pressures:
Natural Gas:
BTU = ft
3
/h x 1000
Megajoules = m
3
/h x 37.26
Liquid Propane Vapor
BTU = ft
3
/h x 2500
Megajoules = m
3
/h / hour x 93.15

Table of Contents

Other manuals for Generac Power Systems PowerPact 7.5 kW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems PowerPact 7.5 kW and is the answer not in the manual?

Generac Power Systems PowerPact 7.5 kW Specifications

General IconGeneral
BrandGenerac Power Systems
ModelPowerPact 7.5 kW
CategoryPortable Generator
LanguageEnglish

Related product manuals