General Dynamics Itronix | 72-0136-005
GD6000 User Guide
Troubleshooting
3. If any programs are open, use your arrow keys to highlight
each one and select
End Task. Repeat this until all programs
are closed.
4. If that still does not work, press and hold the Power Button for
approximately ten seconds and then release it.
The computer enters suspend mode too quickly
When there is no activity for a period of time, the computer
turns off or enters suspend mode.
For WindoWs xP: Use the Power Management program to
extend this time (Start, Settings, Control Panel, Power Man-
agement) and increase the non-activity time to enter suspend.
For WindoWs vista: Click on the Start Button and then on
Control Panel. Locate Mobile PC within the Control Panel, then
choose Change Battery Settings. From here, you will be in
the Power Options program. For each plan displayed, select
Change Plan Settings and modify the Put Computer to Sleep
option.
For WindoWs 7: Select Start, Control Panel, System and
Security. Under Power Options select Change when the com-
puter sleeps. Modify the Put the computer to sleep option.
The computer doesn’t automatically suspend
Exit any application that uses COM ports
Make sure external power is not connected. Depending on
power settings, some systems will not suspend automatically
when they are connected to external power
The system date and time are incorrect
For WindoWs xP: Reset the correct date and time by choos-
ing the Date/Time icon from the Control Panel and making the
appropriate changes.
For WindoWs vista and WindoWs 7: Click on the Start But-
ton, then go to the Control Panel. From here, locate the Clock,
Language and Region setting. Under Date and Time, make the
appropriate changes.
I receive an “out of memory” error message
Too many applications may be running at the same time. Close
applications you don’t need.
Make sure you have enough space on your hard disk (at least
15% free).
Restart the computer.
PC Card Troubleshooting
I can’t remove the PC card
Press the ejector button located next to the PC Card Slot on the
right side of the computer. The button will pop out. Press the
ejector button again to eject the PC card. Slide the card out.
If the ejector button malfunctions when you press it, release the
button and then press it again.
Diskette Read Error
Any card in the PC Card slot except for a properly formatted
memory card will cause this error since it is trying to read the PC
Card.
The system does not recognize the PC Card CD-ROM when it is
inserted into the PC Card socket
There is a delay of 10 to 15 seconds before the CD-ROM drive is
recognized.
Drivers may not be installed.
The computer locks up when I remove the PC card
Before you remove the card, select the PC card icon in the sys-
tem “tray” area of the screen (near the clock in the lower right
corner), and choose “Stop [card name] card.”
FAQs
I’ve heard that cleaning up and rearranging files on
the hard drive will improve the startup speed of my
programs. How do I do this?
Hard disk maintenance can improve the startup speed of
programs. This maintenance includes deleting unnecessary
files and defragmenting to rearrange data into more efficient
groupings. Windows includes utilities for performing these
maintenance tasks.
How do I adjust the volume?
There are two methods to adjust the volume:
metHod 1: Double-click the Volume Control icon on the Win-
dows task bar. Adjusting the slide bar will adjust the volume.
metHod 2: Press FN+F8 or FN+F9 to decrease or increase
volume.
You may also press FN+F10 to mute the computer.
How do I change the battery?
See the section on Battery Installation and Removal.
To Next Page
Loading...
