GeneReach POCKIT Central - Troubleshooting Common Issues

To Next Page

To Previous Page

POCKIT™ Central Nucleic Acid Analyzer

7.2 Turning on UV Lamp

UV lamp can be turned on manually through UV screen.

Go to Home > UV

Select UV from Home screen. Press OK to activate UV

lamp.

The remaining time is displayed on the screen.

7.3 Getting the Instrument Ready for Shipping

Before transporting the instrument, use the original packaging boxes to pack the instrument to

ensure that no damage will occur to the instrument during transportation. Follow instructions

below for shipping setup and repacking.

Note: If the original packaging boxes are lost or damaged, contact local distributor or

GeneReach for replacement packaging boxes.

Go to Home > Cleaning / Shipping Setup

Select Cleaning / Shipping Setup on Home screen, and

press Shipping Setup button.

Select OK to open the door.