GeneReach POCKIT Central - Running Tests

POCKIT™ Central Nucleic Acid Analyzer
13
5.2 Running Tests
Before the instrument is used for the first time, Operator info and Date & Time settings must be
set up before a test can be performed. For further details, please refer to Section 4 Getting
Started.
Go to Home > Start
1)
From Home screen, select Start.
Press Start from Home screen.
The instrument will perform a self test
automatically. Press Next to continue once self test
is passed.
Press OK to proceed.
Note:
1. Make sure nothing blocks the door.
2. Skip this step if the Door Opening/Closing
Alert alert is off.
2)
Entering Sample ID, Extraction Lot No. and Reagent Lot No.
Select the desired slot, and enter the Sample ID and
Extraction Lot No. (stated on the product label).