Version: 2020-09-04
7
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Basic setting of a BACS module
Offset values
Impedance measuring intervals
External current sensor
Premium feature: Ampere Multiplier
Discharge detection: Thresholds for current sensor
Initial BACS module setup
Addressing the BACS modules
BACS Programmer restart conditions
Defining an address range for module reset
General Module setup
Adress range setup conditions
BACS Programmer single mode
BACS Error: HW Revision / Calibration error
BACS Programmer software tool
How to connenct a computer
Preparing BACS installation
Operating modes: Automatic mode
Operating mode: Manual mode
Line check
Receive Line Check
GX_R_AUX
How it works
Connectors
Addressing the GX_R_AUX
Configuration of the GX_R_AUX
GX_R_AUX as battery breaker
Normally Open / Normally Closed contacts
Defining a job to a BACS event
Communicate with third party devices via Outputs / Inputs
BACS functions
BACS Buzzer
BACS Relay
BACS alarm threshold
Overvoltage
Deep discharge
Threshold definition
Battery voltage
Battery temperature
Internal resistance of the battery
Maximum voltage deviation between batteries
Voltage deviation per string
Current deviation per string
Alarm delay
Battery strings and thermal runaway
Define BACS battery strings
BACS strings vs battery breaker
What is a thermal runaway?
Mandatory preconditions for BACS thermal runaway functions
Max. module temperature difference
Max current per string
Above conditions are true since
Log files
BACS Log files
Initial Start up: Pause Equalizing on Schedule
What is an unformed battery?
Why pause Equalizing during initial start up?
How to use a scheduled equalization pause
Equalization Pause Example 1
Equalization Pause Example 2
Equalization Pause Example 3
Tutorial: BACS Equalization paused by system