05
5-19
Digital Key (Card Key)
How to register Digital Key (Card 
Key)
To use the card key as a digital key, 
follow the following procedure.
For Android smart phones
1.  Install Genesis digital key app in main 
user’s smart phone and register the 
digital key (smart phone). Please refer 
to the registration method of the 
digital key (smart phone).
1-1.  Activate Genesis digital key app 
DQGWKHQVHOHFWŕ0HQXƟ6HWWLQJV
Ɵ&DUG.H\(QUROO$XWKHQWLFDWLRQŖ
Please follow the digital key 
authentication procedure 
according to the app.
 - Bluetooth authentication : 
Before starting the process, the 
driver needs to make sure to 
check whether the Bluetooth 
connection is working properly. 
To enroll the card key, please 
VHOHFWŕ0HQXƟ6HWWLQJVƟ&DUG
Key Enroll Authentication” 
in the top right corner of the 
digital key app. The card saving 
process should be completed 
within 5 minutes after the 
authentication process is done 
in the vehicle. 
 - NFC authentication : After 
selecting NFC authentication, 
please contact the smart 
phone on the driver’s or 
passenger’s outside door 
handle.
1-2.  Get in the vehicle with the smart 
key.
Except Android smart phones
1.  Get in the vehicle with two smart keys.
OIK050002
[A] : In-vehicle authentication pad (Wireless charging 
pad) 
2.  Place the NFC card key on the in-
vehicle authentication pad.
OIK050103N
3.  From the  infotainment system 
VHWWLQJVPHQXVHOHFWœ6HWXSƟ
9HKLFOHƟ'LJLWDO.H\Ɵ&DUG.H\Ɵ
Save’. The saving process will begin 
automatically.
4.  When the digital key (card key) is 
saved, a message will appear on the 
infotainment system screen.