06
6-43
&2$67,1*Ç,)(48,33('Ç®
When certain conditions are met, the
engine is automatically decoupled from
the transmission while gear remains in
D (Drive). When Coasting is operating,
the engine stays at idling speed to help
reduce fuel consumption and increase
coasting distance.
Coasting Setting
OIK060063L
ś The Coasting function must be turned
ON from the Settings menu in the
infotainment system screen. Select:
- 6HWXSƟ9HKLFOH6HWWLQJVƟ'ULYH
0RGHƟ&RDVWLQJ
See additional information in
supplied Infotainment Manual.
ś When Coasting is turned ON and
the conditions are met, the function
operates with a ‘Coasting’ message
illuminated on the instrument cluster.
Coasting Operating Conditions
The Coasting function will operate when
the accelerator pedal is depressed and
released under the following conditions.
ś ECO is selected for driving mode
ś ECO is selected for Powertrain in the
CUSTOM menu from the infotainment
system screen. If Smart is selected,
driver acceleration should be mild
ś The gear is in D (Drive)
ś Smart Cruise Control button is OFF
ś Smart Cruise Control function is in
standby
ś The accelerator or brake pedal is not
depressed
ś The vehicle’s speed is within 30~100
mph (50~160 km/h) range
ś The road gradient is within -5~+5%
range
Information
ś If the front radar for Smart Cruise
Control cannot operate normally, the
inter-vehicle distance and relative speed
condition are automatically ignored.
ś The Coasting function works after the
engine is turned on, the transmission is
warmed up, and the engine sensor self-
diagnosis is completed.
ś Depending on the driving situation,
Coasting operation may be temporarily
delayed even if the above conditions are
met.
To Next Page
Loading...
Need help?
General
