05
5-79
+,*+%($0$66,67ǭ+%$Ǯ
OIK047090
High Beam Assist will automatically
adjust the headlamp range (switches
between high beam and low beam)
depending on the brightness of detected
vehicles and certain road conditions.
Detecting sensor (Front view
camera)
OIK070002
[1] : Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
High Beam Assist Settings
OIK050217L
With the Engine Start/Stop button in the
21SRVLWLRQVHOHFWœ/LJKWVƟ+LJK%HDP
Assist’ from the Settings menu to turn on
High Beam Assist and deselect to turn off
the system.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe
location.
To Next Page
Loading...
Need help?
General
