Genesis G90 - Electronic Parking Brake (Epb); Lane Keeping Assist System (Lka); Lane Following Assist (Lfa)

Quick Reference Guide I 50
49 I Quick Reference Guide
GENESIS G90
DRIVING
LANE KEEPING ASSIST SYSTEM (LKA)
LANE FOLLOWING ASSIST (LFA)
ADJUSTING ADAS ALERTS VOLUME
The Lane Keeping Assist System
detects lane markers on the road
with a camera and assists the driver’s
steering to help keep the vehicle
between lanes.
The system operates when the
vehicle speed is between 40 mph
and 110 mph
With the engine on, shortly press the Lane Driving Assist button located
on the steering wheel to turn on Lane Following Assist. The grey or
green indicator light will illuminate on the cluster. Press the button again
to turn off the function.
From the Settings menu to change the
Warning Volume to ‘High’, ‘Medium’, ‘Low’
or ‘Off’
Driver Assistance > Warning Volume or
Sound > Driver Assist Warning > Warning
Volume
• To turn on the LKA, Press and hold
to turn on LKA.
• To turn off the LKA, Press and hold
again to turn off LKA.
NOTE: In some circumstances, LKA may not activate as intended.
ex: blurred lane condition, backlight, heavy fog, reflection of light due to
water on the road, sharp bend in the road, etc.
Please refer to the Owner’s Manual for more information.
ELECTRONIC PARKING BRAKE (EPB)
Applying
Stop the vehicle then
pull up the EPB switch,
Parking Break warning
light comes on.
Releasing
Press the EPB switch
while depressing the
brake pedal.
Automatic releasing
• When shifted to P: Depress the brake pedal and shift out of P to R or D.
• When shifted to N: Depress the brake pedal and shift out of N to R or D.
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
The Highway Driving Assist (HDA) system
helps keep the vehicle between lanes,
maintain a distance with the vehicle ahead,
and automatically adjusts the vehicle speed to
the speed limit while driving on the highway.
With the vehicle on, select or deselect 'Driver
Assistance → Driving Convenience' from the
Settings menu to set whether to use each
function.
- If 'Highway Driving Assist' is selected, it helps
maintain distance from the vehicle ahead,
maintain the set speed, and helps center the
vehicle in the lane.
NOTE: If the vehicle is
turned off then on again,
the system maintains the
last setting.
Operating Conditions:
• Driving on the highway main line.
• Smart Cruise Control is operating.
- If the Smart Cruise Control is in the READY state the Highway Driving
Assist will be in the READY state. The indicator on the cluster will
illuminate white.
• Vehicle speed is under 95 mph (153 km/h).
If all the mentioned conditions are satisfied, the system is ENABLED and
the indicator on the cluster will illuminate green.