Genesis G90 - Near Field Communication (Nfc)

Quick Reference Guide I 54
53 I Quick Reference Guide
GENESIS G90
DRIVING
To lock/unlock your vehicle using the NFC key card, hold the key card
up to the center of the door handle
A
.
If you try to lock your vehicle with the NFC card under the following
conditions, it will not work:
•
The Smart Key is in the vehicle.
•
The POWER button is in ACC or ON position.
•
Any of the doors, hood and trunk are open.
A
A
B
B
NOTE: If you overlap and use the key card with other NFC-enabled cards
such as a transportation card or credit card, it will not work.
*For security reasons, the vehicle can only have one NFC key card paired
to it at one time. Any time that a new Key card is paired to the car it will
disable the previously paired Key Card .
NEAR FIELD COMMUNICATION (NFC)
DIGITAL KEY 2 PAIRING
If the NFC card is lost or stolen, please contact your local GENESIS dealer
for replacement.
Genesis Digital Key allows drivers to start the
engine of their car using a smartphone app and
Near-Field Communication (NFC). Genesis
Digital Key provides many of the same functions
as your physical key. To pair your smartphone,
complete the following steps:
1. Turn the vehicle on with the Smart key and
make sure to keep the smart key inside the
vehicle during digital key registration.
Move arrow indicator to center of door
handle for both card and phone, do not
need to replicate first image. First image
provided to be able to see where arrow
needs to point.
NOTE:
This application is only available for certain iPhone and Samsung devices.
2. Open Genesis Intelligent Assistant App in the vehicle owner’s smart phone
and activate the digital key registration screen after selecting the vehicle to
register.
3. From the infotainment system settings menu, select ‘Setup > Vehicle >
Digital Key > Smartphone Key > My Smartphone Key’.
4. After ‘My Smartphone Key’ is selected, place the backside of the smart
phone on the in-vehicle authentication pad.
5. Select ‘Smartphone Key -> My Smartphone Key -> Save’ menu on the
infotainment system screen.
The saving process will begin automatically.
6. When the digital key (smart phone) is saved, a message will appear on the
infotainment system screen.
7. Remove the smart phone from the pad and complete the saving process
under the guidance of the smart phone screen.