device displayed synchronic. For using this feature, insert the Mini HDMI cable
into the right side of the device interface to connect with TV.
USB device mode options
Before using this feature please connect to PC via the Mini USB cable.
USB debugging
Debug mode used to debug program for developers. ADB driver needs to be
installed before using this mode, Installation method as follows：
（ 1 ） First switch on the device to Install Driver mode, And then find the "CD
driver"(such as F:)on your PC
，
Use the resource manager to open the CD drive ,
then copy all files in the folder(\adb_driver) to your PC;
（ 2 ） And then switch to USB debugging mode on the device, If the PC-side
prompts to install the driver, select manual installation, and specify the drive path
to the location where you saved the ADB driver.
Media Transfer Protocol(MTP)
Media transfer protocol(MTP) mode used to synchronize transmits data and the
users can copy, paste or delete the files in the device. If this is the first time using
this mode on your PC, you need to install the driver. Installation method as
follows：
Firstly, switch to Install Driver mode on the device, and then your PC will
automatically pop-up driver installation interface, users need only follow the
prompts, and reboot the system after the installation completed. (If not, please
go to the Microsoft official website to download Media Player 11 upgrade
package and install.）
Install Driver
Install driver mode used to install the driver for USB debugging and media
transfer protocol(MTP) mode, The media transfer protocol(MTP) mode driver
only for Windows XP, Windows 7 support by default, not need to install.
☆ You can also refer to the readme.txt in the "CD drive".
7 DESKTOP
To Next Page
Loading...
Need help?
General
