Tip: If most selections are to be sold at the same price, use this menu to
quickly set the entire machine to this price, then access the Individual Prices
menu to adjust prices for individual selections. Entering a single price for the
entire machine will over-ride any individual prices previously programmed.
4.4.3 Mug Discount
This sub menu allows the engineer to program a discount value against all drink
selections for customers who use their own cup/mug.
When a customer places their own cup into the dispense area and selects a
drink, the SureVend™ sensors will detect the cup and disable the cup drop
mechanism. The price set for Mug Discount is then subtracted from the price
of the drink selected and the appropriate change/credit returned to the
customer.
N.B. It is important to ensure that any value entered for a mug discount is
supported by the coin mechanism fitted to the machine, e.g. if a mug discount is
set at 2p but the lowest coin available from the coin mechanism is 5p, the
machine will not return the discount to the customer.
1. Highlight the Mug Discount sub menu
from within the Price menu. The LCD will
display the screen, with a current value in
the status line (e.g. 5p), as shown. Press
the ↵ (Edit) key to access the Mug
Discount sub menu.
2. To enter a discount value, e.g. 6p, press the sequence 0-0-0-0-6 using the
appropriate number keys on the drink selection keypad.
3. The LCD will change and display the
screen as shown. Press the ↵ (Edit) key to
return to the Price menu screen and verify
that the new price displays in the status
line along the bottom of the display.
4.4.4 View High/Low Price
This sub menu allows the engineer to view the highest and lowest values in
force, programmed via the Individual Prices sub menu.
N.B. If a single price is currently in force, this value will be displayed in both
fields.
Technical Manual
34
To Next Page
Loading...
Need help?
General