4.3.9 Display
Entry into this menu allows the engineer to test the LCD display screen.
1. Highlight Display in the Test menu and press the ↵ (Edit) key. Press the
START/? key repeatedly to cycle through the different test patterns. The
test patterns will reveal any flaw in the display.
2. Press the X (Exit) key to return to the main test menu screen.
4.3.10 Keypad Test
This menu enables the engineer to test each key on both the drink selection
keypad and internal service keypad to ensure correct operation.
1. Highlight Keypad Test in the Test menu
and press the ↵ (Edit) key. The LCD will
display the screen with Main Keypad
highlighted as shown.
2. To test the Main Keypad, press the ↵
(Edit) key to access the test screen. Press
any key on the drink selection keypad and
verify that it is displayed correctly.
Example; pressing the START/? key on the
drink selection keypad will display the
screen as shown opposite.
3. Press the X (Exit) key to return to the Keypad Test menu screen. Use the
▼ (down) key to highlight Service Keypad and press the ↵ (Edit) key to
access its test screen. Follow the procedure described above to test the
service keypad.
N.B. Pressing either the ↵ (Edit) key or X (Exit) key (or 1 and 2 on the
service keypad) will return to the Keypad Test menu screen.
4.4 Price Menu
Entry into this menu allows the engineer to enter individual prices for each drink
selection available, one price for all drink selections and set a discount to be applied
for customers who use their own cup/mug. The menu also contains a sub menu
which allows the engineer to view the highest and lowest price set in the machines
memory.
N.B. Values entered via this menu are only applicable to machines fitted with a
coin/card system.
Technical Manual
32
To Next Page
Loading...
Need help?
General