2. Press the ↵ (Edit) key to access the menu.
The LCD will display the screen as shown.
By default the current State is set to Off
as indicated by the status line at the
bottom of the screen.
3. Press the ↵ (Edit) key to access the State
sub menu. Using the
▼ (down) key, set
the state to On (indicated by the filled
radio button). Press the ↵ (Edit) key to
return to the Event 1 screen. Verify that
the status line confirms the State is set to
On.
4. Press the
▼ (down) key to highlight Event
Type and press the ↵ (Edit) key to access
the menu. Using the
▼ (down) key, set the
Event Type to Free Vend (indicated by the
filled radio button). Press the ↵ (Edit) key
to return to the Event 1 screen. Verify
that the status line confirms the Event Type is set to Free Vend.
5. Press the
▼ (down) key to highlight Start
Time and press the ↵ (Edit) key. From this
menu the engineer sets the time at which
the free vend period will start. Press the
sequence 1-0-3-0, using the drink selection
keypad, to set the time. If necessary use
the
▲ (up) or ▼ (down) key until AM appears in the dotted box.
6. Press the ↵ (Edit) key to return to the Event 1 screen. Verify that the
correct start time is displayed in the status line at the bottom of the
screen.
7. Press the ▼ (down) key to highlight Stop
Time and press the ↵ (Edit) key. From this
menu the engineer sets the time at which
the free vend period will end. Press the
sequence 0-2-3-0, using the drink selection
keypad, to set the time. If necessary use
the
▲ (up) or ▼ (down) key until PM appears in the dotted box.
8. Press the ↵ (Edit) key to return to the Event 1 screen. Verify that the
correct stop time is displayed in the status line at the bottom of the
screen.
Stop Time
Press Ar rows To Select
hh / mm / mod e: 12 / 24
PM02
:
30
Event Type
Inhibit
Free Vend
Disco unt
Start Time
Press Ar rows To Select
hh / mm / mod e: 12 / 24
AM10
:
30
1
Off
State
Event Type
Start Time
Stop Time
Days Of Week
Technical Manual
63
To Next Page
Loading...
Need help?
General