12
Please Note: if you have purchased a Floor Stand made for the Geneva Sound System,
assemble the Stand, remove the four rubber feet from the main Cabinet and attach the Stand
using the screws provided with the Stand. For detailed assembly, see Manual provided in the
Stand package.
Step 4: Turn the main power switch on.
Step 5: Return the system to an up-right position, so it stands on its four rubber feet.
Step 6: If you intend to use the System with an iPod, open the lid on top of the cabinet.
To open, please press carefully on the rear part of the lid.
75 OHM
1 ( mm ).
240 60 125AC 100- ~ V 50- Hz W
CAUTION: Do not put anything over the ventilation holes. Minimum distance to the floor is
inch 25 Otherwise the device might not perform according to the specifications.
VENTILATION
MAIN POWER
AC INLINE IN
LEFT
FM ANTENNA IN
POWER
FULL OFF
POWER
STANDBY ON
RIGHT
0
1
Line in
Jacks
FM radio
antenna plug
AC Connector
Main power
switch
Ventilation holes
To Next Page
Loading...
