26
Line in:
How to connect a Computer, iPod Shuffle or another MP3 player to the Geneva Sound
System using the 1/8 inch (3.5 mm) input?
1. If there is an iPod in the dock of the Geneva Sound System, please remove it.
2. Use the enclosed MP3 Player cable to connect to a Computer, an iPod Shuffle or any other
type of MP3 player that can be connected with such cable. Insert MP3 Player cable plug into
the 1/8 inch (3.5 mm) auxiliary audio input located on the panel under the lid on top of the
cabinet, between the 4 keys.
3. Plug the cable into the headset output connector from the MP3 player.
4. Press the iPod key on the remote control and start playing the contents of the device you have
connected.
Note that you cannot control any such device using the Geneva Sound System remote control,
but instead using controls available for the connected device.
How to connect a TV, Computer, VCR, DVD player or a game console to the Geneva
Sound System using the “Line In” input?
Use the enclosed Line in (RCA) cable to connect the Geneva Sound System to any device
that has a RCA audio out connector. First connect the Line In cable to the device you want to
connect with the Geneva Sound System, and then connect the cable to the Line In connector
(RCA Jack input) located on the Bottom Panel under the Cabinet. Press the Line In key on the
remote control and start playing the content of the device you have connected. Note that you
cannot control any such device using the Geneva Sound System remote control, but instead use
the controls available for the connected device.
To Next Page
Loading...
