16
Turn on the Geneva Sound System:
Press the power on/off key on the remote control or the on/off key next to the Universal Dock
under the lid on top of the Cabinet.
Select source:
To switch between sources, press either iPod, CD, FM or Line In key on the remote control to
select which source to be controlled.
Listen to your iPod (more details on page 19):
Step 1. Insert the iPod in the corresponding Dock Adapter in the iPod Universal Dock.
Press the iPod key on the remote control and the LED Display under the grille should display
“iPod”. If the display does not lit up, check that the main Power Switch on the Bottom
Panel under the Cabinet is turned on and that the AC power cord is correctly inserted in
to functioning AC outlet.
Step 2. Press the Play key on the remote control or press the key next to the Universal Dock. If
you still cannot hear any sound check that the volume is turned up by adjusting the “+”
volume key.
Step 3. You can navigate your iPod using the Stop, Play/Pause, Skip/Fast Forward, Skip/Fast,
Reverse and Shuffle keys on your remote control.
To Next Page
Loading...
