GENEVO MAX - Main Menu Items; User Interface Settings; Alert Type Configuration; Tone Settings Customization

6
MAIN MENU ITEMS
USER INTERFACE SETTINGS:
DISPLAY: Setting the information displayed on the right side
of the display:
• TIME 24H - Displays time in 24h format.
• VOLTAGE - Displays the battery voltage.
• COMPASS - Displays driving direction.
• TIME AM/PM - Displays time in 12h format.
TIME: Setting local time zone.
USER BUTTON: The user button on the supplied power cable can be
set to the following functions:
• NONE - No function.
• LOCKOUT - Suppresses a false alert location.
• MUTE - Mutes an alert message.
• MARK - Creates an user area.
• SENSITIVITY - Changes the sensitivity setting.
• BRIGHTNESS - Changes the brightness setting.
• POWER OFF - Turns the detector o.
STARTUP SOUND: ON / OFF
GPS STATUS SOUND: ON/OFF. Notication of GPS
connection/disconnection status.
ALERTS: Set the alert type.
• VOICE PRIORITY - The detector announces
the detected band rst, then beeps according
to the alert intensity.
• BEEP PRIORITY – The detector rst starts
beeping, then announces the detected band
and then continues beeping.
• BEEP ONLY – The detector only beeps with
the relevant band tone but does not report
the detected band type.
AUTO MUTE: ON/OFF. Automatically reduces the volume of
alert messages after 5 seconds.
AUTO VOLUME: ON/OFF. Automatically adapts the selected vol-
ume to the noise in the vehicle cabin.
K TONE: 1-15 - Options for selecting dierent alert tone.
KA TONE: 1-15 - Options for selecting dierent alert tone.
MD TONE: 1-15 - Options for selecting dierent alert tone.
MT TONE: 1-15 - Options for selecting dierent alert tone.