GENEVO MAX - Alert Notification Settings; Sensitivity Modes; City Sensitivity Limit; Auto City Sensitivity Limits

7
G3 TONE: 1-15 - Options for selecting dierent alert tone.
G4 TONE: 1-15 - Options for selecting dierent alert tone.
This option allow you to choose dierent sound
for each band separately.
MOTION SENSOR: ON/OFF
Selecting “ON” opens the motion
sensor sensitivity settings.
SENSITIVITY: LOW/MID/HIGH
UNITS: METRIC / IMPERIAL
LANGUAGE: CESKY / ENGLISH
FACTORY RESET: Returns to factory settings.
ALL USER AREAS DELETED: Deletes all saved user areas.
LOCKOUT RESET: Deletes all false alert locations (lockouts).
ALERTS
NOTIFICATION SETTINGS:
SENSITIVITY: HIGHWAY - Maximum detector sensitivity.
CITY - Reduced sensitivity. We recommend using
the reduced sensitivity only in the case of
frequent alerts on a certain band (e.g. when
driving abroad with frequent false alerts on
the K band).
AUTO CITY - Automatically changes the maximum
and reduced sensitivity depending on
the speed.
CITY: Sets the limit of reduced sensitivity. (E.g.: If you
of ten encounter false alerts on the K band with
signal strength 2 when driving through the city,
then set K2, the detector will not warn of any signal
lower than and equal to the set intensity, OFF will
turn o this band in reduced sensitivity).
K: 0–9/OFF
Ka: 0–9/OFF
ACITY (AUTO CITY): This feature enables the sensitivity limit on the K,
and Ka bands within the speed range set by ACITY
Speed (see ACITY Speed below).
K: 0–9/OFF
Ka: 0–9/OFF