Genie Alladin connect - User Manual

1
Wall Button Wire
Photocell wire
Power Pack
Aladdin Connect™
Control Wire
Quick Set-up Guide
DCM
(Door Control Module)
DPS
(Door Position Sensor)
Hardware Bag
Power Pack
Wire Spool
Insulated
Staple x30
Included Components
Recommended Tools
Drill & 3/32 Bit
Small Common
Screwdriver
Phillips Head
Screwdriver
Wire Cutters/
Strippers
Hammer
5/16 Wrench or
Nut Driver
For a video of this installation, visit www.GenieCompany.com/AladdinConnect/InstallationVideo
Need help or have questions? Contact Aladdin Connect™ Customer Service at 1-866-599-4995
Typical Installation shown.
Installations may vary
Scan for the
Aladdin Connect™
installation video
Scan here for additional
Aladdin Connect™
information
39386503197 03/16

Summary

Important Safety Instructions

Installation Warning

Step 1: Home Wi-Fi Router Setup

Step 2: Aladdin Connect App Setup

Step 3: Garage Installation Requirements

Optimal Wi-Fi Signal Strength

Ensures a reliable wireless connection for the Aladdin Connect system within the garage.

Desired DCM Location

Choosing an appropriate mounting spot for the Door Control Module (DCM).

Access to 110 VAC Outlet

Requirement for a power source within 5 feet of the DCM mounting location.

Step 4: Wire Aladdin Connect

Wiring Options and Other Openers

Details on wiring to the opener or wall control, and compatibility with other brands.

Step 5: Mount and Power Aladdin Connect

Step 6: Mount DPS Module to Garage Door

Step 7: Complete the Programming

Genie Alladin connect Specifications

General

Brand	Genie
Model	Alladin connect
Category	Garage Door Opener
Language	English