Genie GS-2669 User Manual

Operator's Manual First Edition • Fourth Printing
Maintenance
46 GS
™
-2669BE • GS
™
-3369BE • GS
™
-4069BE Part No. 826570GT
Maint ena nce
Observe and Obey:
 Only routine maintenance items specified in
this manual shall be performed by the operator.
 Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer’s specifications
and the requirements specified in the
responsibilities manual.
 Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that n
ew parts will be required to
perform this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off.
1 Check the oil level dipstick. Add oil as needed.
Kohler KD-350 Engine
Oil type
SAE 15W-
40

Genie GS-2669 Specifications

General

Drive Speed - Raised	0.5 mph
Drive Speed - Elevated	0.5 mph
Battery	24 V DC (Four 6 V batteries)
Tire Type	Non-marking
Power Source	Electric
Drive Motor	24V DC