Need help?Do you have a question about the Genie GS-1932 and is the answer not in the manual?
General| Working Height | 25 ft (7.79 m) |
|---|---|
| Platform Height | 19 ft (5.79 m) |
| Width | 32 in (0.81 m) |
| Lift Capacity | 227 kg |
| Drive Speed - Elevated | 0.8 km/h |
| Turning Radius (Inside) | 0 in |
| Power Source | 24V DC (four 6V 225Ah batteries) |
| Fuel Type | Diesel |
| Drive Speed | 2.2 mph (3.5 km/h) |
| Drive Speed - Lowered | 2.2 mph (3.5 km/h) |
Explains Genie's symbols, color coding, and signal words for hazards.
Defines the machine's purpose for lifting personnel and materials to aerial work sites.
Provides guidance on maintaining and cleaning safety signs on the machine.
Illustrates and describes the location and meaning of various safety decals on the machine.
Addresses the requirements and use of personal fall protection equipment when operating the machine.
Covers electrocution risks and factors leading to tip-over.
Covers bodily injury from leaks, explosion/fire risks, and machine damage.
Addresses crushing, slopes, falls, collisions, and outrigger operation safety.
Describes the functions and buttons of the ground control panel for machine operation.
Details the indicators and controls for operating the outriggers on GS-3232 models.
Explains the functions of the thumb rocker, drive speed, lift controls, and emergency stop on the platform.
Outlines the importance and process of visual inspections before operating the machine.
Explains the purpose of function tests to identify malfunctions before use.
Guides users on verifying the legibility and placement of all machine decals.
Instructions for using the emergency stop buttons and the emergency lowering feature.
Procedures for operating the machine from both ground and platform controls.
Step-by-step guide for extending and retracting outriggers on GS-3232 models.
Detailed steps for folding down the platform guardrail sections for transport or storage.
Guidelines for safely securing the machine to a transport vehicle using chains or straps.
Instructions on using forklift pockets for safe lifting and avoiding component damage.
Provides a table and diagrams for determining the machine's center of gravity for lifting.
Procedures for inspecting and maintaining the hydraulic oil level for proper machine operation.
Steps for inspecting battery condition, fluid levels, and cable connections.
To Next Page
