To Next PageTo Next Page
Need help?Do you have a question about the Genie Z-30 and is the answer not in the manual?
Platform Specifications| platform dimensions (length x width) | 152 cm x 76 cm |
|---|---|
| platform leveling | self-leveling |
| platform rotation | 130° |
| ac outlet in platform | standard |
Power and Performance| power source | 8 6V 220AH Batteries |
|---|---|
| controls | 24V DC proportional |
| hydraulic pressure (maximum, boom functions) | 138 bar |
| hydraulic tank capacity | 9.5 liters |
| drive speed, stowed | 0 - 7.2 km/h |
| drive speed, raised | 0 - 1 km/h |
Noise and Slope| airborne noise emissions | 70 dB |
|---|---|
| maximum slope rating, stowed position (counterweight uphill) | 20% (11°) |
| maximum slope rating, stowed position (counterweight downhill) | 20% (11°) |
| maximum slope rating, stowed position (side slope) | 20% (11°) |
Weight and Dimensions| height, working maximum | 11.28 m |
|---|---|
| height, platform maximum | 9.45 m |
| height, stowed | 2 m |
| horizontal reach, maximum | 6.1 m |
| width | 1.8 m |
| length, stowed | 4.8 m |
| maximum load capacity | 227 kg |
| wheelbase | 1.83 m |
| turning radius (outside) | 4.19 m |
| turning radius (inside) | 1.93 m |
| ground clearance | 19 cm |
| weight | 4000 kg |
Machine is not electrically insulated and offers no protection from electrical current.
Occupants and equipment must not exceed maximum platform capacity.
Safety precautions for handling batteries, including burn and explosion hazards.
Identifies and describes controls located in the operator's platform.
Items to check for damage or missing parts during the pre-operation inspection.
Verifying drive, braking, steering, and limited drive speed functions.
