Need help?Do you have a question about the Genie Z45/25J and is the answer not in the manual?
Load Capacities| maximum load capacity | 500 lbs 227 kg |
|---|---|
| auxiliary platform load capacity | 300 lbs 136 kg |
Power| power source | 8 Group-4H, 6V 315AH Batteries with Kubota Z482-E engine |
|---|---|
| system voltage | 48V |
| controls | 24V DC proportional |
Performance| maximum drive speed stowed | 3.0 mph 4.8 km/h |
|---|---|
| maximum drive speed booms raised | 0.6 mph 1 km/h |
| airborne noise emissions | 100 dB |
| platform rotation | 160° |
| hydraulic pressure | 3200 psi 221 bar |
Fuel| fuel tank capacity | 9 gallons 34.1 liters |
|---|---|
| fuel specification | Diesel or JP-8 Jet Fuel |
Slope Rating| platform downhill slope rating | 30% (17°) |
|---|---|
| platform uphill slope rating | 20% (11°) |
| side slope rating | 25% (14°) |
Floor Loading Information| axle load | 13, 100 lbs 5942 kg |
|---|---|
| wheel load | 8600 lbs 3901 kg |
| localized pressure per tire | 100 psi 7.03 kg/cm[2] 690 kPa |
| occupied pressure | 325 psf 15.87 kPa |
Weight and Dimensions| working height | 49 ft 3 in 15.0 m |
|---|---|
| platform height | 43 ft 3 in 13.2 m |
| stowed height | 6 ft 7 in 2.0 m |
| horizontal reach | 23 ft 6 in 7.2 m |
| width | 5 ft 10.3 in 1.79 m |
| stowed length | 22 ft 5 in 6.83 m |
| wheelbase | 6 ft 8 in 2.0 m |
| inside turning radius | 6 ft 1.8 m |
| outside turning radius | 14 ft 4.3 m |
| turntable rotation | 355° |
| turntable tailswing | 0 in 0 cm |
| platform dimensions | 72 in x 30 in 1.8 m x 76 cm |
| auxiliary platform dimensions | 24 in x 18 in 61 cm x 46 cm |
| ground clearance | 4 in 10 cm |
Weight| machine weight | 17, 500 lbs 7938 kg |
|---|---|
| machine weight with auxiliary platform | 17, 600 lbs 7983 kg |
To Next Page
