7
3-1 LED Indicators
The meanings of the LED indicators located on the top of LCD
monitor are:
LED Status Description
Red On The camera is busy, please
continue to perform the
operation after the camera
restore to be blinking
Blinking Camera is powered on and
standby
Green On Macro mode
Off Basic Mode for photography
3-2 LCD Monitor Display
(1) Image resolution
(2) Image quality
(3) Current working mode
(4) Memory card loaded symbol
(5) Possible number of shots
(6) Self-timer photography
(7) White balance display
(8) Morning/Afternoon display
(9) Time display
(10) Date display
(11) Remaining battery power
(12) Zoom lever
(13) Flash status
Chapter 3 Controls, Operation, a
d Display
Standby/Busy
(Red LED)
Macro Mode
(Green LED)
8
3-3 Power Supply
●Slide the lens cover toward left gently and turn on the camera
after two beeps sound.
●Slide the lens cover toward right gently and turn off the camera.
●Using the lens cover located on the front of the camera to turn
n/off camera. After turn on the camera, the red LED will be
blinking, and then the last image recorded appears on the LCD
monitor.
※If no operation is carried out for a fixed amount of time
(default: about 1 minute), the power is turned OFF to
prevent battery wear. This is called "Auto Power OFF".
You can press the “Mode Display Button” to restart the camera.
※The following features will automatically save the
configuration before turn off the camera unless you ever
selected "Reset Default" to restore its factory anticipated
settings.
1.Resolution
2.Quality
3.OSD Language
4.White Balance
5.EV Compensation
6.TV-Out
7.Light Frequency
8.PC Mode
To Next Page
Loading...
Need help?
General
