15
5. EV Compensation
6. OSD Language
7. Date/Time
8. Reset to default factory anticipated settings
9. Format Media
※ If there is a memory card inserted, it will only format the
memory card, not the internal memory.
10. TV-Out Operation
11. Light Frequency
Select the correct frequency type (50Hz or 60Hz) according to your
region.
16
5-1 Attaching the Strap
●Insert the thin end of strap into the strap holder.
.
●Pass the other end of strap through the loop.
●Stretch the strap tightly.
5-2 Loading Batteries
●Turn off the power of camera.
Insert 2 x AA alkaline batteries or a rechargeable battery.
Please make sure the batteries are full of power. If the
batteries are in low power, please change the new batteries
as soon as possible for keep the camera operating normally.
●Slide the switch on the battery cover in the direction indicated
by the arrow.
●Insert the batteries as indicated on the inner side of the cover.
Chapter 5 Preparing Your Camer
To Next Page
Loading...
