How
to Shut
Off
the Theft-Deterrent Feature
If
your radio is secured
(SEC
shows on the display) and
you
wish
to
disable it, enter your security code as
follows, pausing no more than
15
seconds between
steps.
Press the 1 and
4
buttons together. Hold them down until
SEC shows
on
the display. You are now ready
to
enter
your security code.
Press
the
SEEK
4
button and hold it until the first digit
of your code appears.
Press the SEEK button and hold it
until
the
second
digit
of
your code appears.
Press the TUNE
4
button and hold it until the third digit
of your code appears.
Press the
TUNE
button and hold
it
until
the fourth
di.git
of
your code appears.
Press
AM-FM
after
you
have checked that the code
you
entered matches the
one
you wrote down.
“0000”
should
now appear
on
the display and
you
will need to repeat
the above procedure.
If
the
code
is
correct, the radio
will
now operate.
If
the
code
is
wrong, Err will appear in
the
display.
To
Unlock the System After a Power
Loss
If
power
is
disrupted to the radio while
in
the SEC
mode, the unit will
not
work and
LOC
will
show on the
display whenever the ignition is
on.
To unlock the unit,
press
4
SEEK
b
or
4
TUNE
b
and
“0000”
will appear
on the display.
Press the SEEK
4
button and hold it until the first digit
of
your code appears.
Press the SEEK
b
button and hold it until the second
digit of your code appears.
Press
the
TUNE
4
button and hold it until the third digit
of
your code appears.
Press the TUNE
b
button and hold it until the fourth
digit
of
your code appears.
Press
AM-FM
after
you
have checked that the
coae
matches
the
one
you
wrote down. Now
the
time
of
day
will appear
on
the display. (Please note that if an
incorrect code is entered,
Err will appear
on
the display
and the above steps need to be repeated.)
To Next Page
Loading...
Need help?
General
