11 8EZiSYSTEM, Functional Checks
Functional test check list
Functional Test Check List
Unit:
Sonde...
Serial Number: Comments:
Test Operative Fail analysis Notes
Yes No N/A
1. Casing
Fail Casing should be free of
damage.
2. Screw thread and
seal
Fail Screw thread must be intact
and seal in place.
3. Battery contacts Fail Contacts must be free of corro-
sion.
4. 33 kHz mode Fail LED must be illuminated
brightly and pulse fast. Locator
must provide maximum
display at 2 metres.
5. 8 kHz mode Fail LED must be illuminated
brightly and pulse slowly.
Locator must provide
maximum display at 2 metres.
Tested by: Date:
To Next Page
Loading...
