GeoMax EZiSYSTEM i Series User Manual

EZiSYSTEM, How to Use the Locator 13
2.2 Locator Overview
Locator main parts

The case foot can be replaced if it is worn. Contact your agency or Cable Detection author-
ised service workshop.
a) Display Panel
Contains the operational controls.
b) Speakers (mounted internally left and right)
Active at power on and when a signal is detected.
c) On/Off Trigger
Press and hold the trigger to activate the Locator.
Release the trigger to deactivate.
d) Battery Hatch Release
Pressing the release button unlocks the battery
hatch allowing access to the battery compartment.
e) Battery Compartment
6 x LR6 (AA) alkaline batteries are used. Replace all
batteries when indicated.
f) Case Foot
F
i
a
b
c
d
e
f

GeoMax EZiSYSTEM i Series Specifications

General

Brand	GeoMax
Model	EZiSYSTEM i Series
Category	Security Sensors
Language	English