GeoMax EZiSYSTEM i Series - Page 14

14EZiSYSTEM, How to Use the Locator
Display panel overview
a) Signal Strength Indicator
Indicates the response of the Locator to a signal
(service).
b) Mode Indicators
Displays the selected mode: Power, Radio, 8 kHz,
33 kHz, Auto,
(512 Hz and 640 Hz on xf models).
A
s shown, from bottom to top.
c) Function Button
Selects operating mode.
d) Light Sensor
Automatically switches the displays backlight on
or off to suit light conditions.
e) Battery Indicator
Indicates the battery condition. Segment illumina-
tion decreases as battery condition declines.
Replace the batteries when the battery indicator is
empty.
f) M Indicator
Symbol Static: Memory enabled
GPS índicator (i700, i750, i750xf)
Symbol Flashing: GPS active and recording GPS
coordinates.
Symbol Static: No GPS position.
g) Bluetooth Status Indicator
Symbol Static: Bluetooth is enabled
Symbol Flashing: Bluetooth is paired
No Symbol: Bluetooth is disabled
h) Wrench
Indicates the Locator requires periodic service or unit is faulty.
a
b
c
d
e
f
g
h
i
j
k
l
m
n