GeoMax EZiSYSTEM i Series User Manual

EZiSYSTEM, How to Use the Transmitter 45
3.3 How to Locate a Service Using the Transmitter
Start up test The following test sequence will take place every time the Transmitter is activated.
On test Test pattern
Audio output On throughout test sequence.
LEDs LEDs are all lit throughout the test sequence.
Default mode selection 33 kHz and power output level two is automatically
selected. Induction mode is selected unless the Trans-
mitter's cable set or accessories are connected.
1

GeoMax EZiSYSTEM i Series Specifications

General

Brand	GeoMax
Model	EZiSYSTEM i Series
Category	Security Sensors
Language	English