ZTS600 | 168Safety Directions
Product specific treatment and waste management information can be down-
loaded from the GeoMax home page at http://www.geomax-posi-
tioning.com/treatment or received from your GeoMax dealer.
13.6 Laser Classification
13.6.1 General
General The following directions (in accordance with the state of the art - international
standard IEC 60825-1 (2007-03) and IEC TR 60825-14 (2004-02)) provide
instruction and training information to the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid oper-
ational hazards.
The person responsible for the product must ensure that all users understand
these directions and adhere to them.
Products classified as laser class 1, class 2 and class 3R do not
require:
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area
if used and operated as defined in this user manual due to the low
eye hazard level.
To Next Page
Loading...
Need help?
General
