ZTS600 | 4Introduction
Validity of this
manual
Description
General This manual applies to ZTS600 instruments.
Tele-
scope
• Measuring with IR mode: When measuring distances to a
reflector with Electronic Distance Measurement (EDM) mode
"IR", the telescope uses a wide visible red laser beam, which
emerges coaxially from the telescope's objective.
• Measuring with RL modes: Instruments that are equipped
with a reflectorless EDM additionally offer the EDM mode
"RL". When meauring distances with this EDM mode, the
telescope uses a narrow visible red laser beam, which
emerges coaxially from the telescope's objective.
To Next Page
Loading...
Need help?
General
