42
English
Quick Tour
The windows will also show the time to reach the target
waypoint, distance, bearing and estimated time to arrive.
Press the EXIT key to go back to Navigation mode. To add more
waypoints, enter the Cursor mode by using the joystick and
repeat the operations described above.
As new waypoints are added, the numbering will increase
progressively. In case of error, waypoints can be deleted by
pressing the CLR key (Cursor mode), starting from the last en-
tered. To go back to Navigation mode, press EXIT.
If an autopilot is connected to the GEONAV, the plotted route
is automatically followed as soon as the Navigation mode is
enabled.
NOTE: The cursor can be moved to the desired position by using the GOTO functions
as well. See the relevant sections for more details.
The NAVIONICS Platinum™ charts provide detailed informa-
tion that can be displayed at any time.
To Next Page
Loading...
