Geonav 6 PLUS - GEONAV Depth Sounder Display; Sea Depth Graph and Data; GEONAV Navigation to Waypoint; Waypoint Navigation Guidance

offered by Busse-Yachtshop.com
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
3534
NAVIGATION TO WAYPOINT WINDOW
When the navigation to waypoint window
is activated, the active route leg is tem-
porarily deleted and replaced with a line
constantly connecting the boat’s position
to the current target waypoint. The win-
dow at the bottom of the screen displays
the following data:
• Boat’s speed
• Distance from the boat’s position to
the target waypoint
• Bearing from the boat’s position to the
target waypoint
• Steering angle
DEPTH SOUNDER WINDOW
A depth sensor can be interfaced with the
GEONAV via NMEA.
In this case, the GEONAV automatically en-
ables the depth sounder function, display-
ing a graph of sea depth.
The depth scale, whose unit can be selected
from the menu in meters, feet or fathoms,
will change automatically to show deeper
or shallower water.
In Navigation mode, press PAGE until the depth sounder window ap-
pears.
The window will display the following data:
• Sea depth
• Depth scale
• Sea temperature (if available)
When navigating in waters deeper than sounder access range or if the
boat’s speed is too high for depth sounding, data acquisition will be
interrupted and the number replaced by “—”.
To deactivate the depth sounder window, press PAGE.
Depth Sounder Window
Navigation to Waypoint Window
Elite
Cabin
Regatta
Plus