GEPRC MARK5 - DJI Transmitter Control Configuration; Factory Switch Assignments; Switch Function Activation Method

11 / 19
ARM(DJI Transmitter):
1. With DJI FPV Transmitter, the toggle switch is set at the factory. The corresponding
functions of each switch are as follows:
SAAUX1（ARM）
SBAUX2（MODES）
SCAUX3（BEEPER）
SDAUX4（Vacancy）
2. DJI toggle switches are all three sections. If you move the Yellow cursor of the
corresponding aux channel of the switch, the corresponding function will be turned on
when you move to the set range.
    




