GEPRC MARK5 - FrSky R-XSR Binding Guide; Taranis Transmitter Menu Navigation; Receiver Binding Activation; Verifying FrSky Binding Success

7 / 19
Bind FrSky R-XSR:
1. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the MENU
– MODEL SETUP – PAGE 2, choose Internal RF, and select BIND to enter the binding
state..
2. Turn on the receiver while holding the bind button on the receiver, release the button
and the bule,red,yellow LED on .
3. When the red light flashes, it indicates that the binding is successful.Turn off the
receiver,and then turn on the receiver.The blue light and yellow light of receiver are on,
indicating that the link is normal.
1
2
3
Binding Button
Binding
Binding Successful