Gerber Technology AccuPlot AP-300 User Manual

Offline Operation
4-22 Setting the Pen and Inkjet Timers
TO SET THE INKJET TIMER
1. From page one of the Offline menu, press the Menu key one time to
display page two.
2. From page two of the Offline menu, press F4-Tool Tmr to display the tool
timer menu.
3. Press F2-Inkjet Timer to see the current values.
4. Do one of the following:
• Press F1-New Cartridge to restart the timer after installing a new
inkjet cartridge.
• Press F2-Timer On to enable the timer.
5. Press F4-Exit until you reach page one of the Offline menu.
6. From page one of the Offline menu, press F2-Initialize to load the new
timer value.
TOOL TIMERS
PEN TIMER
INKJET TIMER EXIT
INKJET LEVEL
xxx PERCENT
NEW CARTRIDGE
TIMER ON EXIT

Gerber Technology AccuPlot AP-300 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-300
Category	Plotter
Language	English