Gerber Technology GERBERplotter XLp Series User Manual

________________________________________________
15
English
14. Plug the Power Cord into the Power Cord Socket (Figure
15).
15. Plug the opposite end into a wall electrical socket.
16. Push the Power Switch to the I (ON) position to turn the
plotter power on.
NOTE: The plotter will beep when powered on.
Figure 15. Power cord
Key to Figure
1. Power Switch in ON position
2. Power cord in socket

Gerber Technology GERBERplotter XLp Series Specifications

General

Brand	Gerber Technology
Model	GERBERplotter XLp Series
Category	Printer
Language	English