• Push the introduction help sideways into the air cylinder housing.
•
Push with your thumb on the base of the introduction help and then pull
back with your fingers until Stop.
•
Grease the Airzet-Ring
•
Mount all parts following the drawings shown in the operating instruction
booklet or on the spare parts price list.
•
Warning : Important notice:
Take good care of correct installation of the distance cage (91) into the
control valve of the Taurus 2 and 3 to
ols. The distance cage carries a slot
on one side. Insert the distance cage with the slotted side first in such a
way that the slot connects with the nose inside the control valve bore.
Installation of the 3 following distance cages is indifferent.
The first distance cage is not present in the Taurus 1. Installation of the 3
distance cages is indifferent.
Re-assembling the tool is done in reversed sequence
11
To Previous Page
Loading...
