3 Hardware and Connectivity Overview
The following table describes the connectivity options for Airconsole serial port
connectivity depending on your terminal client device
iOS Device (iPad, iPhone, iPod
Touch) running iOS 7.0 or later
Mac running OSX version 10.8 or
later
Android Device (ie Samsung S3 or
later) running Android 4.1 or later
4 Airconsole Web Configuration
Airconsole has a built in webpage that can be used to change the default settings, as
well as flash the device with new firmware if required. To access this webpage complete
steps 1 and 3 of the initial setup instructions above, and then browse to
http://192.168.10.1/ from any modern web browser.