It is the control knob for wrapping tension.
Turn the knob clockwise to increase the tension.
Turn the knob anticlockwise to decrease the tension.
NOTE: 1 ) Turntable speed and wrap tension can be adjusted individually.
2) Wrapping tension on the package edge and side are the same
3) After setting the wrapping tension, it is suitable for any package and
no need to make adjustment.
RESET BUTTON
Pressing the button, all operation is released and the machine returns to
natural status.
PAUSE BUTTON
Press the button; the machine will be stop whether it is under automatic
or manual mode. Press the START button to complete the rest program.
EMG. STOP
Pressing this button to make emergency stop.
MAIN POWER
This is the main power cut switch.
To Next Page
Loading...
